Scissor Lift Rough Terrain
This information is provided as a quick quide to common user issues and is not to be seen as an Operators Guide.
Users need to read and are familiar with the Operator Manual before using machine.
Download Operator Manual
Index
Engine won’t start?
Scissor Lift won’t go up & alarm beeps?
Unit Won’t Level – legs won’t go down?
Engine Won’t Start?
* The Battery Isolator Switch must be “open”.
* There are two Emergency Stop Switches.
BOTH MUST be pulled out for unit to work;
1 x Platform Controls
1 x Base
Unit won’t level – legs won’t go down.
Joystick control must be squeezed and held on 2 seconds BEFORE and while activating the out rigger toggle switches (ie it’s a two hand operation for safety).
No controls on the control panel will work without squeezing and holding the joy stick control.
Scissor Lift won’t go up and “double alarm” beeps.
Unit is not level.
Level Light (there is one on both bottom and top control panel) must be lit.
If the light isn’t on, the scissor must be leveled with outriggers.
(Note – the out rigger function won’t work from the platform control unless the joy stick control is squeezed.)
